AWLGRIP

AWLGRIP AWLCARE PROTECTIVE SEALER Pint

Awlcare is a protective polymer sealer, formulated to protect Awlgrip, Awlcraft 2000 and Awlgrip HDT from acid rain, environmental pollutants and abrasion. Leaves a non-yellowing protective coat that lasts through multiple washings. Contains no abrasives and will not scratch the painted surface Removes mild stains such a water spots and diesel soot Increases resistance to acid rain and other environmental pollutants

€ 39,90

AWLGRIP

AWLGRIP AWLWASH QUART

Awlgrip Awlwash wash down concentrate (73234). Formulated to clean Awlgrip, Awlgrip HS and Awlcraft 2000. Free rinsing formula for faster drying. For use above water. Contains no alkalis, acids or abrasives. 100% biodegradable. Quart.

€ 39,00

AWLGRIP

AWLGRIP AWLWASH SOAP 2.0

Awlwash 2.0 is a wash down concentrate formulated to clean Awlgrip Finishes. Contains no alkalis, acids or abrasives. 73235 GALLON

€ 85,00

AWLGRIP

AWLGRIP GRIPTEX NON SKID 1KG

Griptex is a non-skid polymer bead aggregate used to coat deck and step areas with a non-slip coating. Apply by spray or mix with any Awlgrip finish. 73012 FINE 73013 COARSE

€ 60,00

AWLGRIP

AWLFAIR LW STANDARD AND FAST

Awlfair LW Standard is a premium trowelable epoxy filler, which acts as a fairing compound for the smoothing of irregular surfaces. Allows the creation of a level, even surface which reduces drag and improves the boat’s appearance. Sandable after 17 hours at 25ºC D8200 BASE D7200 STANDARD D7222 FAST

€ 89,00

AWLGRIP

AWLGRIP REDUCERS

Reducer for use with a range of spray & brush applied Awlgrip primers, Varish and Topcoats. T0001 T0002 T0003 T0005 T0006 T0008 T0073 T0031

€ 39,00

AWLGRIP

AWLGRIP TOPCOAT SPRAY/BRUSH CONVERTER

Awlgrip AwlCat #3 Brush Converter MUST BE USED WITH AWLGRIP ONLY WHEN PAINTING WITH A BRUSH OR ROLLER. Recommended for professional use only. Features: * Type: 2-Part Linear Aliphatic Polyester Polyurethane * Mix 1 part H3002 to 2 parts Topcoat Base Compound Mixing and Reduction Mix two parts Awlgrip Topcoat Base Compound by volume with one part AWL-CAT H3002 brushing converter until a smooth and homogeneous mixture is obtained. Reduce 25% to 33% with T0031. The overall mix is ​​2:1/4-1 volume. Awlgrip AwlCat #2 Spary Converter MUST BE USED WITH AWLGRIP ONLY WHEN PAINTING WITH A SPRAY GUN. Recommended for professional use only. Features: * Type: 2-Part Linear Aliphatic Polyester Polyurethane * Mix 1 part G3010 to 2 parts Topcoat Base Compound Mixing and Reduction Mix two parts Awlgrip Topcoat Base Compound by volume with one part AWL-CAT G3010 Spray converter until a smooth and homogeneous mixture is obtained. Reduce 25% to 33% with T0001. The overall mix is ​​2:1/4-1 volume.

€ 165,00

AWLGRIP

ULTRA BUILD PRIMER D8008 GALLON

Ultra Build Epoxy Primer is a two-component epoxy primer sealer used where high build and filling is required above the waterline. Combines excellent build capacity and resistance to print-through.

€ 345,00

AWLGRIP

HIGH BUILD PRIMER D8002 GALLON

High Build Epoxy Primer D8002 is an epoxy surfacing primer, used where high build and filling is required above the waterline. Ideal for use over Awlgrip primers and fairing compounds, can also be applied directly to pre-prepared wood or fiberglass.

€ 279,00

AWLGRIP

HULLGARD EXTRA PRIMER GALLON KIT A+B

Hullgard Extra is an epoxy holding primer, used to provide a stable base for subsequent fairing. Offers superb adhesion to properly prepared fiberglass, steel, aluminum and wood. For use above and below the waterline. INC PART A&B - D6120/G - D3730/Q

€ 279,90

AWLGRIP

AWLGRIP MAX COR CF PRIMER GALLON R4330

Max Cor CF is a two-component high solid epoxy primer, tailored to provide aluminum and steel with excellent chemical and solvent resistance. A chromate-free product with innovative Controlled Fusion (CF) technology for extended re-coat times, improved substrate adhesion and reduced sanding.

€ 625,00

AWLGRIP

AWLWOOD VARNISHES & BRIGHTWORK SYSTEMS

Awlwood Clear Gloss is a 1-pack clear varnish, designed for exterior application above the waterline. Combined with Awlwood Primer, Awlwood Clear Gloss forms a fast-curing system with great flow and high abrasion resistance that is both buffable and repairable.

€ 155,00

AWLGRIP

AWLSPAR VARNISH M3131 QUARTER

Awlspar is a classic phenolic tung oil varnish, used for brightwork protection against corrosion and abrasion from water and weather. Fast-drying and re-coatable, for quick and flexible application.

€ 99,00

AWLGRIP

AWLBRITE CLEAR GLOSS J3005

Awlbrite Clear Gloss is a three-component acrylic urethane wood finish, used to create a more durable and fast-curing brightwork system compared to a simple varnish for above the waterline

€ 155,00

AWLGRIP

AWLCRAFT PREMIUM TOPCOAT QRT/GALLON

AwlCraft Topcoat is a premium quality polyurethane high gloss finish, formulated to deliver a great appearance combined with excellent chemical resistance and hardness. Awlgrip topcoat has an easy mix ratio, and can be combined with a range of reducers for a flexible application providing incredible results.

€ 179,00

AWLGRIP

AWLGRIP PREMIUM TOPCOAT QRT/GALLON

Awlgrip Topcoat is a premium quality polyurethane high gloss finish, formulated to deliver a great appearance combined with excellent chemical resistance and hardness. Awlgrip topcoat has an easy mix ratio, and can be combined with a range of reducers for a flexible application providing incredible results.

€ 145,00