TEAKDECKING SYSTEM

TEAK DECKING ECO-100

ECO-100 TEAK CLEANER ORDERING INFORMATION ECO-100 Teak Cleaner Powder is a high-performance, concentrated cleaner for teak and our composite decks that is diluted with water. It contains no harsh acids, caustic sodas and phosphates, yet it is a powerful and effective cleaner that cleans and brightens without removing the soft fibers of your teak. It mixes easily in water and is designed to not harm your teak, caulking, hardware or paint. This product has been formulated to be 100% environmentally-friendly and represents the most advanced truly “green” teak cleaner powder in the marine industry today. Meets Florida Clean Marina Program standards and is MARPOL compliant. ECO-100 TEAK CLEANER POWDER 100% Environmentally safe; non-toxic Concentrated – Dilute with water No acid, caustic sodas or phosphates

€ 27,50

TEAKDECKING SYSTEM

TEAK DECKING REEFING HOOK TOOL

The Teakdecking Systems reefing hook removes caulk and other flexible materials from teak seams. Hook scrapes caulk and other seam sealants once they have been freed using a razor knife. It leaves minimal material residue that can be easily cleaned with a hand sander such as Teakdecking Systems Seam Sander. Designed for a long life span, this reefing hook was made with hand comfort in mind, making prepping your teak for caulking a breeze.

€ 55,00

TEAKDECKING SYSTEM

TEAK DECKING SYSTEM CAULK

SIS 440 Teak Deck Caulking One-part polymer adhesive/sealant neutral cure No primer necessary* Over 35 years of proven success SIS 440 Caulking provides the durability boat owners require. It is a one-part, paste-like neutral cure formulation and when exposed to moisture in the air, it reacts to form a tough, flexible, solid rubber. The material does not sag during cure. Once cured, it has excellent temperature stability and chemical resistance. This neutral cure is non-corrosive to all substrates. SIS 440 Caulking was developed mainly for teak decking seams. This silane polymer cures to provide better adhesion, longevity and appearance as compared to polysulfides, polyurethanes and MS polymers. SIS 440 has the highest rating resistance to UV, excellent resistance to chemicals and excellent temperature stability. *SIS 440 Caulking is a well-tested and proven product in hot or cold climates, and no primer is needed when Application Instructions on packaging are followed as written.

€ 39,90

KENT MARINE

KENT ROTABOND 2000 - 290ML

Rotabond 2000 A high performance, one component, MS-Polymer adhesive and sealant. Features & Benefits No solvents - can be over painted after skin forming No isocyanates - completely safe to use & can be spot welded through Heavy bodied sealer - no slump or sag Totally flexible - will not shrink, crack or harden Does not string - neat application, quality finish Wet / dry application - saves time Application Rotabond 2000 is for use as an all-purpose sealer and highly flexible adhesive. Adheres to primed, painted and bare metal, zinc coating, aluminum, copper, brass, powder coated metal, glass, wood, natural stone and most plastics. For sealing welded seams, fixing metals and synthetics, fixing and sealing window frames, floors, panels, roofing, sanitary fittings, piping, seal and cover rivet / fastener heads.

€ 29,90

HAMMERITE

HAMMERITE DIRECT RUST ULTIMATE MATT CANS 750ML

Hammerite Ultima is the next evolution in metal paint. It is Water Based and especially formulated to be applied direct to rust and direct to any type of metal without a primer. It provides a highly durable decorative finish for up to 12 years. Suitable for application on gates, railings, garden furniture and all type of outdoor metal.

€ 39,90

HAMMERITE

HAMMERITE DIRECT RUST SMOOTH FINISH CANS 750ML

Looking for a glossy, smooth finish for a flawless high sheen? Hammerite Direct to Rust Metal Paint Smooth Finish is specially formulated to perform as primer, undercoat and top coat in one. It can be painted directly onto rusty surfaces. It is ideal for a wide range of metal surfaces including trailers, down pipes, gutters, gates, railings and garden furniture. An Aerosol is ideal for those hard to reach and intricate areas or quick touch ups.

€ 39,90

INTERNATIONAL

INTERNATIONAL THINNERS 1LT

Thinners has been specially formulated for thinning for a differt type of International product.

€ 32,00

INTERNATIONAL

INTERNATIONAL INTERPROTECT PRIMER 2 PARTS

Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminium, ferro cement and timber hulls, above and below the waterline

€ 55,00

INTERNATIONAL

INTERNATIONAL PRIMOCON PRIMER

Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied. Formulated for timber, steel, aluminium, cast iron keels and lead keels

€ 39,90

INTERNATIONAL

INTERNATIONAL DANBOLINE BILDGE PAINT

Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear. Danboline will resist oil and fuel spillage and cleans easily

€ 45,00

INTERNATIONAL

INTERNATIONAL MICRON 99 ANTIFOULING 20LT BLACK

Micron 99 is designed to give you strong antifouling protection against slime, aquatic plants and animals. It’s a multi-seasonal, Self Polishing Copolymer (SPC), so over time, it can increase fuel efficiency and speed.  

€ 1800,00

INTERNATIONAL

INTERNATIONAL INTERIOR FINISH 750/770 PART A/B WHITE

Interior Finish 750 on all interiors to create a tough, durable and opaque finish, that offers great chemical resistance. When used with Interior Primer 860, it holds a Surface Spread of Flame certificate. Suitable for all interior areas, Interior Finish 770 Satin creates a stunningly uniform satin white finish. This also makes it great for deck-heads and for other areas when you’re not after a full gloss finish.

€ 295,00

AWLGRIP

AWLGRIP AWLWASH SOAP 2.0

Awlwash 2.0 is a wash down concentrate formulated to clean Awlgrip Finishes. Contains no alkalis, acids or abrasives. 73235 GALLON

€ 85,00

AWLGRIP

AWLGRIP GRIPTEX NON SKID 1KG

Griptex is a non-skid polymer bead aggregate used to coat deck and step areas with a non-slip coating. Apply by spray or mix with any Awlgrip finish. 73012 FINE 73013 COARSE

€ 60,00

AWLGRIP

AWLFAIR LW STANDARD AND FAST

Awlfair LW Standard is a premium trowelable epoxy filler, which acts as a fairing compound for the smoothing of irregular surfaces. Allows the creation of a level, even surface which reduces drag and improves the boat’s appearance. Sandable after 17 hours at 25ºC D8200 BASE D7200 STANDARD D7222 FAST

€ 89,00

AWLGRIP

AWLGRIP REDUCERS

Reducer for use with a range of spray & brush applied Awlgrip primers, Varish and Topcoats. T0001 T0002 T0003 T0005 T0006 T0008 T0073 T0031

€ 39,00

AWLGRIP

AWLGRIP TOPCOAT SPRAY/BRUSH CONVERTER

Awlgrip AwlCat #3 Brush Converter MUST BE USED WITH AWLGRIP ONLY WHEN PAINTING WITH A BRUSH OR ROLLER. Recommended for professional use only. Features: * Type: 2-Part Linear Aliphatic Polyester Polyurethane * Mix 1 part H3002 to 2 parts Topcoat Base Compound Mixing and Reduction Mix two parts Awlgrip Topcoat Base Compound by volume with one part AWL-CAT H3002 brushing converter until a smooth and homogeneous mixture is obtained. Reduce 25% to 33% with T0031. The overall mix is ​​2:1/4-1 volume. Awlgrip AwlCat #2 Spary Converter MUST BE USED WITH AWLGRIP ONLY WHEN PAINTING WITH A SPRAY GUN. Recommended for professional use only. Features: * Type: 2-Part Linear Aliphatic Polyester Polyurethane * Mix 1 part G3010 to 2 parts Topcoat Base Compound Mixing and Reduction Mix two parts Awlgrip Topcoat Base Compound by volume with one part AWL-CAT G3010 Spray converter until a smooth and homogeneous mixture is obtained. Reduce 25% to 33% with T0001. The overall mix is ​​2:1/4-1 volume.

€ 165,00

AWLGRIP

ULTRA BUILD PRIMER D8008 GALLON

Ultra Build Epoxy Primer is a two-component epoxy primer sealer used where high build and filling is required above the waterline. Combines excellent build capacity and resistance to print-through.

€ 345,00

AWLGRIP

HIGH BUILD PRIMER D8002 GALLON

High Build Epoxy Primer D8002 is an epoxy surfacing primer, used where high build and filling is required above the waterline. Ideal for use over Awlgrip primers and fairing compounds, can also be applied directly to pre-prepared wood or fiberglass.

€ 279,00

AWLGRIP

HULLGARD EXTRA PRIMER GALLON KIT A+B

Hullgard Extra is an epoxy holding primer, used to provide a stable base for subsequent fairing. Offers superb adhesion to properly prepared fiberglass, steel, aluminum and wood. For use above and below the waterline. INC PART A&B - D6120/G - D3730/Q

€ 279,90

AWLGRIP

AWLGRIP MAX COR CF PRIMER GALLON R4330

Max Cor CF is a two-component high solid epoxy primer, tailored to provide aluminum and steel with excellent chemical and solvent resistance. A chromate-free product with innovative Controlled Fusion (CF) technology for extended re-coat times, improved substrate adhesion and reduced sanding.

€ 625,00

AWLGRIP

AWLWOOD VARNISHES & BRIGHTWORK SYSTEMS

Awlwood Clear Gloss is a 1-pack clear varnish, designed for exterior application above the waterline. Combined with Awlwood Primer, Awlwood Clear Gloss forms a fast-curing system with great flow and high abrasion resistance that is both buffable and repairable.

€ 155,00

AWLGRIP

AWLSPAR VARNISH M3131 QUARTER

Awlspar is a classic phenolic tung oil varnish, used for brightwork protection against corrosion and abrasion from water and weather. Fast-drying and re-coatable, for quick and flexible application.

€ 99,00

AWLGRIP

AWLBRITE CLEAR GLOSS J3005

Awlbrite Clear Gloss is a three-component acrylic urethane wood finish, used to create a more durable and fast-curing brightwork system compared to a simple varnish for above the waterline

€ 155,00

AWLGRIP

AWLCRAFT PREMIUM TOPCOAT QRT/GALLON

AwlCraft Topcoat is a premium quality polyurethane high gloss finish, formulated to deliver a great appearance combined with excellent chemical resistance and hardness. Awlgrip topcoat has an easy mix ratio, and can be combined with a range of reducers for a flexible application providing incredible results.

€ 179,00

AWLGRIP

AWLGRIP PREMIUM TOPCOAT QRT/GALLON

Awlgrip Topcoat is a premium quality polyurethane high gloss finish, formulated to deliver a great appearance combined with excellent chemical resistance and hardness. Awlgrip topcoat has an easy mix ratio, and can be combined with a range of reducers for a flexible application providing incredible results.

€ 145,00