Maintenance

STARBRITE

STARBRITE WATERPROOFING - PTEF -81922

Waterproofing spray, waterproofer, stain repellent and UV Protection for boat covers, car covers, Bimini tops, tents, jackets, backpacks, boots, awnings, patio covers and more Does not change the breathability, color, or feel of fabric Great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays Star brite Waterproofing restores water repellency to virtually all marine fabrics from boat covers to bimini tops. It is also the easiest, most effective way to waterproof car covers, tents, tarps, foul weather gear, convertible tops and more. Waterproofing is also great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays. It’s easy to use; simply spray the fabric to be restored, and allow it to dry for 6 hours before use. Always apply Waterproofing outdoors, taking care to not breathe the solution. 650 ml – 7.5 m² coverage 3.78 L - 43 m² coverage Coverage may vary slightly depending upon amount of product applied per m². Star brite Waterproofing is compatible with most quality outdoor fabrics including; nylon, canvas, finished leather, and acrylics. However, some economy materials like polyester and urethane-backed fabrics are not compatible with most solvents, so please check the material before use. Also note that solvent-based products can affect the adhesive glue used on some carpeting, and can further depreciate heavily sun damaged fabric. For delicate surfaces, Star brite Water-Based Waterproofing is a safer alternative. NOTE: Waterproofing is ready to use at full strength for best results. If dilution is required, use mineral spirits. Cutting with denatured alcohol will cause clumping and adverse affects.

€ 32,00

STARBRITE

STARBRITE BLEND 80W90 GEAR LUBE - 946ML

Synthetic blend gear lube units for all outboard motors and stern drives Ideal for all engines over 100 hp Exceptional long-term protection against rust and corrosion, extending your engine’s lifespan Special additives ensure great thermal stability and anti-wear protection, even under high temperature conditions Recommended for use in Mercury, Mercruiser, Johnson, Evinrude, OMC, Force, Mariner, Nissan, Suzuki, Yamaha, Volvo, Tohatsu, and more Meets all specs for API GL-5, API MT-1, SAE J2360, and Mack GO-J Star brite Synthetic Blend 80W90 Lower Unit Gear Lube is designed for API GL-5, MT-1 service SAE J2360, and Mack GO-J, making it the perfect choice for long term performance. It's recommended for all engines over 100 hp, providing exceptional protection against rust and corrosion. With its special extreme pressure and anti-wear additives, this outboard gear oil ensures great thermal stability. The easy installation process involves draining old oil, installing the fill tube, refilling with new lubricant, and replacing the plugs.

€ 49,90

STARBRITE

STARBRITE SUPER PREMIUM 4 STROKE OUTBOARD OIL SAE 10W40 28200- 3.79 L

Premium, synthetic blend engine oil designed for 4-stroke high-performance outboards, gasoline inboards and stern drives Additive package optimizes engine cleanliness, prevents sludge build up Shear-stable polymer additives plus synthetic base stocks maintain proper viscosity under extremely harsh marine conditions Synthetic/organic blend assures excellent low-temperature properties for quicker starts Provides maximum protection in severe, high rpm applications Marine engines typically operate at higher rpms than automotive engines, requiring an oil that is specifically designed and formulated to provide protection under these higher temperature, higher stress circumstances Surpasses API requirements for SJ, CF-4 and CH-4 Star brite PRO Star® Super Premium Synthetic Blend 4-Stroke Outboard Oil SAE 10W40 is specifically designed for high-performance 4-stroke outboard engines, gasoline inboard engines, and stern drives. These engines are often used in harsh, salty environments that are much more demanding than the conditions most car engines face. Therefore, their engine oil must meet the challenge. It is one of the first 4-stroke oils certified under the new NMMA FC-W category. It meets or exceeds all criteria for viscosity, filter blocking, foaming, and air bubbles. Successfully passed the NMMA’s 100-hour performance test.

€ 70,00

STARBRITE

STARBRITE PRO STAR 4 STROKE HEAVY DUTY OIL SEA 15W40 28000 - 3.79 L

Heavy-duty formula minimizes engine wear for a long engine life For all diesel and gasoline engines that require SAE 15W40 grade and API service classification, including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, MAN, and Volvo Recommended for engines that require API CI performance level Recommended for applications requiring ACEA E3 & E5, MB228.3, Cummins CES 20077, 20076, 20072 & 20071, DDC/MTU Type 1 & 2, Mack EO-M Plus, EO-M & EO-L Plus, Volvo VDS & VDS-2, Allison C4, JASO DH1, MAN 271 & 3275, and GlobalDHD-1 performance API Service Classifications: CJ-4, CH-4, CG-4, CF-4, CF, CE, CD/SJ, SH, and EC Star brite PRO Star® Heavy Duty Motor Oil SAE 15W40 minimizes engine wear for extended engine life. Exceeds the highest performance specifications for engines requiring CI service. Recommended for engines requiring API CI-level performance. Meets warranty requirements for all diesel and gasoline engines that require SAE 15W40 grade and API service classification, including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, and Volvo. Recommended for applications that require ACEA E3, E5, MB228.3, Cummins CES 20077, 20076, 20072, and 20071, DDC/MTU Type 1 and 2, Mack EO-M Plus, EO-M and EO-L Plus, Volvo VDS and VDS-2, Allison C4, JASO DH1, MAN 271 and 3275, and Global DHD-1 performance. API Service Classifications: CJ-4, CH-4, CG-4, CF-4, CF, CE, CD/SJ, SH, and EC.

€ 70,00

STARBRITE

STARBRITE PREMIUM 2 STROKE ENGINE OIL TC-W3- 3.79 L

High-grade synthetic-blend, exceeds all OEM oils, meets or exceeds all engine manufacturer specifications, and contains a higher concentration of the additives found in Premium TC-W3 Ideal for FICHT, E-TEC, Optimax, and HPDI outboard engines, personal watercraft, pre-mix and direct injection Contains PIB viscosity modifier to greatly improve lubricity and to reduce smoking High-detergent formula removes deposits from fuel delivery system, ensuring a clean and efficient engine Minimizes piston ring sticking and protects against pre-ignition issues, extending the life of your engine Environmentally friendly, clean-burning oil that reduces emissions Star brite Super Premium+ 2-Cycle Synthetic Blend Engine Oil TC-W3® combines an extremely high-grade synthetic-blend base stock with a custom additive package. The result is the best synthetic-blend TC-W3 oil available that equals or exceeds all OEM oils. It will not void engine warranties, meets or exceeds all engine manufacturer specifications and provides first-rate performance and protection at an affordable price. Super Premium+ TC-W3 contains a higher concentration of the additives found in Premium TC-W3. It is ideal for use in high-performance engines, including FICHT, E-TEC, Optimax and HPDI outboards. It is ideal for use in all 2-cycle engines, to include personal watercraft, pre-mix and direct-injection designs.

€ 70,00

PERMANON GERMANY

Permanon Universal cleaning PS Paste

Universal cleaning PS Paste The cleaning paste PS Universal is a real power pack for stubborn, crusted contaminations and dried in soilings on sensitive and durable surfaces. A must-have for gentle deep cleansing. The PS Universal paste easily removes even the most stubborn dirt gently and intensively. Well suited for pre-treatment it is used as a pre-cleaner on surfaces to be protected leaving a pleasant fragrance. This universally applicable special cleaning agent from Permanon can handle severe organic soiling gently and down to the pores both indoors and outdoors. This product of Permanon can be ideally used as a pre-cleaner for cleaning heavy impurities in the whole line of Permanon, from Diamond, Aircraft, Pool & Spa over Boat and Yacht up to Car, Matt, and Solar. Outstanding cleaning results on: high gloss coatings synthetic leather polished stainless steel plastic and synthetic materials of all kinds except polycarbonate (can result in stress-induced cracking) different kinds of metal stone and tiles The PS Universal paste is neither an abrasive nor harmful to the environment or human health. This universal cleaner optimizes in-depth cleaning in the way that it is biodegradable cleaning thoroughly and effectively. The surface deeply cleaned into its capillary structure is now optimally prepared for the value-maintaining surface protection with Permanon Supershine products. This cleaning paste can be used for almost all materials with the exception of polycarbonate (can result in stress-induced cracking). The PS Universal paste works against stubborn organic contamination, such as: oil and fuel residues, grease deposits, silicon accumulations, algae infestation, verdigris, black rain streaks, mold deposits, mould stains, ink, markers and graffiti, exhaust and soot build-up.

€ 40,00

COBA EUROPE

DeckStep Industrial Matting - Ribbed vinyl matting for swimming pools Blu & Black 10 M Roll

Raise people’s feet off wet floor surfaces. Reduce the risk of slips by keeping feet above surface water. Provides a more comfortable barefoot walking surface than tiled floors. Textured surface provides slip resistance. Flexible and lightweight – easy to move and clean. Ribs are welded together for strength. Slip tested to DIN 51097.

€ 650,00

MORSE

MORSE HOLE SAW CUTTER FOR METAL

Description The Bi-Metal Hole Saw features a patented tooth set design that delivers faster hole cutting. The saw’s solid cap minimizes runout and vibration for a more accurate cut. With a cutting depth of 1–15/16″, the saws are designed for general purpose use across a wide range of materials including wood, plastic, machinable metals, stainless steel alloys, and nail-embedded wood. An enhanced side slot offers increased leverage for faster and easier slug removal.

€ 9,25

PROPSPEED

PROPSPEED - ANTIFOULING KIT®

Keep your running gear and any other underwater metals free of marine growth and protected against corrosion with Propspeed®. Propspeed®, the original and best performing foul-release coating in the industry, has been tried and tested around the world for over 24 years. With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

€ 590,00

PROPSPEED

PROPSPEED - LIGHTSPEED KIT®

Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed has been endorsed by Lumishore and is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. The application of Lightspeed can be completed in 3 easy steps: 1. Clean 2. Apply 3. Let it dry

€ 54,90

PROPSPEED

STRIPSPEED PROPSPEED STRIPPER 5 LITERS

Remove Propspeed® & foul-release coatings hassle free! Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed™ removes foul release coatings in 30 minutes* or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn’t cause mechanical wear through multiple refits, and doesn’t create toxic dusts or debris, increasing the lifetime of the metal. *Timing is subject to atmospheric conditions. The ideal temperature is 15-27°C (60-80°F)

€ 395,00

CLIN AZUR

CLIN AZUR 222 TEAK CLEANER POWDER

Quickly and thoroughly cleans teak and exotic wood decks before applying Teak 201 Renovator. Alkaline product.

€ 21,90

CLIN AZUR

CLIN AZUR 202 OXALIC ACID

Known for many years as "sorrel salt", oxalic acid powder is used in the marine and pleasure boating industries for cleaning and bleaching teak decks.

€ 17,90

CLIN AZUR

CLIN AZUR 212 TEAK OIL SEALER

Synthetic oil specially formulated to protect teak, which it waterproofs and colours very lightly in light brown. Efficiency guaranteed for several months in a temperate climate.

€ 35,00

CLIN AZUR

CLIN AZUR 204 GELCOAT RESTORER

Polishing paste for plasticised surfaces such as polyester, gelcoat or epoxy. Its action in phase 1 combines perfectly with our PTFE 218 polish in finish, the whole produces a very deep shine of the gel coat.

€ 19,90

CLIN AZUR

CLIN AZUR 218 PTFE POLISH 500ML

Formulation intended for renovation or protection work on new or old painted surfaces. The 218 has the advantage of guaranteeing a truly exceptional finish and restoring the surfaces to their original shine and a brilliant shine.

€ 32,90

CLIN AZUR

CLIN AZUR 100SP RUST OFF CLEANER 700ML

100SP has been specially formulated to act instantly on hull yellowing, rust traces and drips (corrosion stains).

€ 18,90

CLIN AZUR

CLIN AZUR 910 CALCIUM STAIN REMOVER FOR GLASS 500GR

Formulation based on powder with a very fine grain size containing cerium oxide. Product used to remove calcium stains (salt deposits) that mark boat glazing leaving traces of droplets that detergents cannot remove.

€ 129,90

CLIN AZUR

CLIN AZUR 910L GLASS POLISH 500GR

Functions: - Removes calcium stains. - Restores shine & transparency. - Erases micro scratches. Features: - Ready to use. - Specially designed for glass processing. - Do not use on plexiglass.

€ 22,90

FESTOOL

FESTOOL PREMIUM SHEEPSKIN POLISH PAD 150MM - PN 202046

       PREMIUM SHEEPSKIN Uniform coat structure for an even polishing finish Easy handling and low spattering characteristics due to pile height of 18 mm Real hair sheepskin for high abrasiveness and an excellent polishing finish Optimum adhesion thanks to full covering with adhesive velour and edge seams

€ 29,90

FESTOOL

FESTOOL POLISHING PAD 150MM

Hard-Fine polishing sponge for paint prep and applying abrasive compounds, polishes, and waxes. Orange. (5 pieces). Medium-Fine polishing sponge for paint prep and applying abrasive compounds, polishes, and waxes. Blue. (5 pieces). Soft-Fine polishing sponge for paint prep and applying abrasive compounds, polishes, and waxes. White. (5 pieces).

€ 24,90

FESTOOL

FESTOOL POLISHING AGENT PASTE 0.5LT

Details of success. Festool polishes make polishing easy: Ideally suited to different kinds of polishing work, they guarantee optimum results with minimum effort in combination with the appropriate pad. Festool polishes facilitate a simple finish on the surface They guarantee optimum results in combination with the appropriate pad The formulas are perfectly matched to individual requirements Speed Gloss fine sanding polish does not contain silicone water-based

€ 39,90

BELZONA

BELZONA REPAIR KITS

BELZONA 1111 - SUPER METAL REPAIR 1KG 2KG BELZONA 1212 - SURFACE TOLERANT EPOXY 450GR BELZONA 1321 - CERAMIC S-METAL REPAIR 1KG BELZONA 9111 - CLEANER 0.5LT 5LT

€ 195,00

SKYCO OSPHO

OSPHO RUST REMOVER & PREVENTER

Get metal surfaces ready for a fresh coat of paint with the Skyco OSPHO Rust Remover Treatment. By converting rust into iron phosphate, this treatment creates a rust-retardant surface that is a great base for paint on both interior and exterior surfaces. Comes in a gallon and quarter bottle Helps get metal surfaces ready for a fresh coat of paint Converts iron oxide (rust) into iron phosphate to create a rust-retardant surface Great for both interior and exterior surfaces

€ 19,90

SEMCO

SEMCO TEAK SEALER GALLON

SEMCO Teak Sealer is a solvent based sealer which contains pigments, UV inhibitors and moisture protection.SEMCO Teak Sealer is manufactured in several shades.

€ 195,00 € 175,00

DAVIS

DAVIS FSR BIG JOB FIBERGLASS STAIN REMOVER

FSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. Works like magic to clean up fiberglass stains! Use anywhere else fiberglass stains may crop up—shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse.

€ 75,00

PSY

PSY WHITE LINT FREE RAGS 100% COTTON - 10KG

Cotton Rags 10kg. General purpose cleaning rags. Cotton rags suitable for workshops and garages.

€ 70,00

PSY

PSY WHITE COTTON RAGS 10KG

Cotton Rags 10kg. General purpose cleaning rags. Cotton rags suitable for workshops and garages.

€ 35,00

PSY

PSY COLORED COTTON RAGS 10KG

Cotton Rags 10kg. General purpose cleaning rags. Cotton rags suitable for workshops and garages.

€ 30,00

BRASSO

BRASSO MULTI PURPOSE METAL POLISH LIQUID 235ML

Brasso® Metal Polish quality has been around over 100 years. It cleans & polishes a variety of metals, providing a long-lasting smooth, polished surface and brilliant shine. Shake well, soak a clean cloth/sponge with Brasso and apply to metal. Brasso can help to polish: car rims, faucets, metal kitchenware, metal furniture, brass door knobs & locks, stainless refrigerators, ovens, toasters & dishwashers. Do not use on silver, lacquered, painted or antique-finished surfaces.

€ 9,50

BRASSO

BRASSO METAL POLISH WADDING 75G

Brasso Metal Polish Wadding keeps metal looking immaculate. For use on brass, copper, stainless steel and chrome, this product has been specially designed to provide excellent results and a longer lasting shine. These wadding pads have been impregnated with cleaning fluid meaning there is no need to get an extra cloth dirty. Brasso Metal Polish Wadding has been in use for over a century - it has truly stood the test of time - and this product will continue to maintain the lustre of metal surfaces in the future.

€ 6,95

BRASSO

BRASSO METAL POLISH LIQUID 175ML

Metal Polish for longer lasting shine and excellent results on Brass, Copper, Stainless Steel & Chrome.

€ 6,95

TANGIT

TANGIT UNI LOCK PIPE SEALING CORD 80mtr

PRODUCT ADVANTAGES Very easy application. Immediately ready for use from the dispenser – no need for additional pastes. Replaces hemp/paste and PTFE tapes (Teflon®). One Tangit UNILOCK dispenser replaces approx. 20 rolls of Teflon® tape. Up to 55 % lower costs and up to 45 % faster than hemp (acc. to a REFA time study). Enables easy alignment of outlet taps. Instant sealing of water, gas and compressed air lines. Temperature resistant between -20°C and +130°C. Pressure resistant up to 16 bar. Gas and hot water approved acc. EN751-2 and DIN 30660 by DVGW. Hot drinking water approved acc. BS6920 by WRc. Drinking water approved acc. KTW by TZW. Adjustable up to 45°.   Packaging Details: 80m dispenser 160m dispenser 180m dispenser

€ 14,90

TANGIT

TANGIT PVC-U CLEANER PRIMER PVC-C & ABS

PRODUCT ADVANTAGES Ensures a safe and reliable bond in conjunction with Tangit pipe adhesives. Reliably removes residues and soiling. Prevents leakage problems. Excellent cleaning and priming performance. Very good dissolution performance. Constantly monitored and consistently high quality. High cleanliness dries without residue. Packaging Details 125ml Can 1L Can

€ 7,90

TANGIT

TANGIT PVC-U ADHESIVE

PRODUCT ADVANTAGES Long open time of 4 minutes. Easy bonding, even of larger dimensions (one person sufficient for pipes up to 80 mm). Easy and clean handling. Higher security thanks to excellent gap-bridging capability (low flow value). Maximum leak protection. The bonded joints are as resistant as the respective pipe material (exception: concentrated acids). Meets the requirements of EN 14814 and EN 14680. Complies with EN 1329 for discharging water with plastic piping systems. Packaging Details 125g Tube 250g Can (with and without brush) 500g Can (with and without brush) 1kg Can (with and without brush)

€ 7,90

AUTOSOL

AUTOSOL METAL POLISH PASTE

World-famous and internationally awarded cleaning and care product for all metallic surfaces. Contamination and rust can be easily removed in a single operation. Due to the balanced formulation of the active ingredients, surface protection is applied to the metals in addition to excellent cleaning. Achieves brilliant high gloss. 75ml tube or 750ml can

€ 4,90

COLLINITE

COLLINITE HEAVY DUTY CLEANER 920 - 473ML

First step compound for moderate oxidation and staining leaves a high gloss, wax ready shine.

€ 19,90

COLLINITE

COLLINITE FLEETWAX CLEANER-WAX 870 - 473ML

All in one cleaner-wax removes mild oxidation & staining while leaving behind a high gloss, protective shine

€ 29,90

COLLINITE

COLLINITE FIBREGLASS MARINE WAX 925 - 473M

Easy to use Carnauba-Polymer Hybrid Sealant provides high gloss shine and long-lasting weather defense

€ 29,90

COLLINITE

COLLINITE LEATHER & VINYL WAX 855 - 473M

All in one leather and vinyl treatment moisturizes, gently cleans and protects

€ 32,90

COLLINITE

COLLINITE METAL WAX 850 - 473ML

Easy to use all-in-one hand polish for weathered, bare metals restores and protects in one single operation.

€ 24,90

COLLINITE

COLLINITE INSULATOR WAX 845 - 473ML

Carnauba-Polymer Hybrid Paint Sealant combines ease of use, high gloss shine and legendary durability. Long-lasting results have never been easier.

€ 38,00

USS

USS TEF GEL ULTRA STOPS SALT WATER CORROSION

ULTRA Tef-Gel® lubricates and eliminates corrosion between dissimilar metals by preventing saltwater electrolytes from getting to the surface of those connecting metals. Preventing seizing, galling, and friction welding of stainless steel, Inconel, Aluminum, and other nickel alloys. Tef-Gel® contains no volatile solvents, will not evaporate, dry out, or wash away, providing long lasting protection and ease of disassembly years later. Great for all your anti-corrosion needs.

€ 25,50

MAGICA

MAGICA RUST REMOVER GEL

The gel formula is thicker than the spray, allowing more control with certain rusted stains and surfaces.

€ 35,00

KING & KING

TEAK MINUS STEP 2 10L

TEAK MINUS is a biodegradable teak cleaner , controlled phosphate-free and acid-free in its formulation. Developed specifically for use in the marine industry, TEAK MINUS is concentrated to emulsify and dissolve dirt, grease, oils and other pollutants that accumulate in teak wood.

€ 135,00

KING & KING

TEAK MINUS STEP 1 10L

TEAK MINUS is a biodegradable teak cleaner , controlled phosphate-free and acid-free in its formulation. Developed specifically for use in the marine industry, TEAK MINUS is concentrated to emulsify and dissolve dirt, grease, oils and other pollutants that accumulate in teak wood.

€ 135,00

FLITZ

FLITZ METAL POLISH

Flitz Polishing Paste is a polishing paste that is used for many different things. You use it to remove small scratches, to remove anodization from titanium or to get rid of light rust. You can also use it to remove light scratches on plastics, to prevent rust or even as a polishing paste when stropping your knife. When you do some research on various knife blogs and forums you come across the many purposes for this - according to some - miracle cure.

€ 39,90

STAR CLEAN

STAR CLEAN WET METAL POLISH PASTE 150ML

Superior Shine applied with NO buffing. Apply STAR CLEAN with a damp sponge, wash the item and then dry it with a rag. That’s it ! STAR CLEAN One Step metal Treatment is a powerful cleaner / protector and leaves a high gloss finish without buffing! Used on all metals: Stainless steel, copper, brass, aluminium, chrome, gold or silver (not silver plated) also very effective on enamel, ceramics and fiberglass. STAR CLEAN can be used on your boat, car, home, and RV. Treat stainless steel kitchen surfaces, chrome wheels an boat railings in a fraction of the time you used to spend. Easy, quick and long lasting. STAR CLEAN is a non-acidic metal treatment that is kind to the skin.

€ 9,90

TEAK WONDER

TEAK WONDER - DRESSING & SEALER 3.8LTR

WONDER® DRESSING & SEALER is a safe and durable, non-oil based product which provides a pleasant golden colour without darkening the teak or producing that fake coloured look. The special components in TEAK WONDER® DRESSING & SEALER seal the wood, blocking the penetration of dust and dirt whilst protecting the natural teak oils against ultraviolet rays, slowing the oxidation and discoloration process. The sealing treatment helps inhibit the penetration into the wood of liquids such as fuel, oil, fish blood, paints, etc. As long as these are not allowed to dry, they will be much easier to remove. TEAK WONDER® DRESSING & SEALER does not make the teak glossy or slippery, does not falsely darken the teak and does not build up an accumulation on the surface. The product is quick drying and does not smell. It is recommended that two coats are applied (with heavy brush strokes) on new teak. If teak is old or dirty, then the wood should be previously treated with TEAK WONDER®

€ 95,00

TEAK WONDER

TEAK WONDER - TEAK BRIGHTENER 3.8LTR

TEAK WONDER® BRIGHTENER is a lightening process used to eliminate shading from the teak which may still persist even after the application of the TEAK WONDER® CLEANER. The application of TEAK WONDER® BRIGHTENER is not always necessary, but when used on aged surfaces it has an effect that seems miraculous: the teak immediately regains its natural colour (like newly sanded but without removing precious layers of grain). The brightening process should be carried out on a wet surface, ideally straight after cleaning. Apply TEAK WONDER® BRIGHTENER sparingly and evenly to avoid a patchy result then wash the deck. The effect of the TEAK WONDER® BRIGHTENER, is immediate and the result instant. As with the cleaner, rinse away the solution with plenty of fresh water. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. Once dry, the surface is ready for application of protective TEAK WONDER® DRESSING & SEALER. Carefully wash away any product left on non teak surfaces.

€ 45,00