Adhesive & Sealant

WEST SYSTEM

WEST SYSTEM - A PACK - 105/206 - 1.2KG

105 resin mixed with 206 slow hardener can be used for extended assembly times when working in ideal conditions or the ambient temperature is higher than normal. This cured resin/hardener mixture yields a high-strength, rigid solid which has excellent cohesive properties and provides an outstanding moisture vapour barrier with excellent bonding & coating properties. Pot Life at 25°C = 20 to 30 minutes Cure to Solid State at 21°C = 9 to 12 hours Cure to Maximum Strength at 21°C = 5 to 7 days Minimum Recommended Working Temperature = 16°C Pumps Required = (5:1 ratio) 301, 306 or 309

€ 65,00

3M

3M MARINE ADHESIVE SEALANT 4200 - BLACK

A one-part, general all-purpose polyurethane that chemically reacts with moisture to deliver flexible bonds with good adhesion to wood, fiberglass, gelcoat, plastics and metals. Paintable and sandable Forms watertight, weather resistant seals on joints and boat hardware above or below the waterline Medium strength allows for disassembly Not recommended for sealing wood decks because it may be permanently softened by certain teak cleaners or sealers

€ 24,90

3M

3M MARINE ADHESIVE SEALANT 5200 - BLACK

3M™ Marine Adhesive Sealant 5200 is extremely strong and retains its strength above or below water line. Stays flexible too – allows for structural movement. Has excellent resistance to weathering and salt water. Very high strength Watertight bonds

€ 59,00

3M

3M MARINE ADHESIVE SEALANT 5200FC - WHITE

3M™ Marine Adhesive Sealant 5200 is extremely strong and retains its strength above or below water line. Stays flexible too – allows for structural movement.

€ 45,00

ARALDITE

ARALDITE STANDARD EPOXY-RESIN ADHESIVE 2X15ML - 3722008

ARALDITE Epoxy Adhesive, Two-Part Adhesive Based On Epoxy Resins. Grey Resin And Beige Hardener. Bonding, Repairing And Filling Metals,Wood, Stone, Pottery, China, Ceramics, Ivory And Various Plastics, Such As Polyester, Formica And Bakelite,To Themselves And To Each Other. Specially For Metal Object Which Need Resistance To Extreme Condition Such As Heat, Chemical, Vibrations Or Seawater. Not Suitable For Plastics Such As Polyethylene,P.T.F.E. And Silicone Rubber. Super Strong And Waterproof Temp. Resistance: From – 60°C Up To + 100°C. Specially Developed For Industrial And Automotive Trade Applications 1 x 15ml Epoxy

€ 12,95

ARALDITE

ARALDITE FAST EPOXY-RESIN ADHESIVE 2X15ML - 3718708

ARALDITE Epoxy Adhesive, Two-Part Adhesive Based On Epoxy Resins. Grey Resin And Beige Hardener. Bonding, Repairing And Filling Metals,Wood, Stone, Pottery, China, Ceramics, Ivory And Various Plastics, Such As Polyester, Formica And Bakelite,To Themselves And To Each Other. Specially For Metal Object Which Need Resistance To Extreme Condition Such As Heat, Chemical, Vibrations Or Seawater. Not Suitable For Plastics Such As Polyethylene,P.T.F.E. And Silicone Rubber. Super Strong And Waterproof Temp. Resistance: From – 60°C Up To + 100°C. Specially Developed For Industrial And Automotive Trade Applications 1 x 15ml Epoxy

€ 12,95

TANGIT

TANGIT UNI LOCK PIPE SEALING CORD 80mtr

PRODUCT ADVANTAGES Very easy application. Immediately ready for use from the dispenser – no need for additional pastes. Replaces hemp/paste and PTFE tapes (Teflon®). One Tangit UNILOCK dispenser replaces approx. 20 rolls of Teflon® tape. Up to 55 % lower costs and up to 45 % faster than hemp (acc. to a REFA time study). Enables easy alignment of outlet taps. Instant sealing of water, gas and compressed air lines. Temperature resistant between -20°C and +130°C. Pressure resistant up to 16 bar. Gas and hot water approved acc. EN751-2 and DIN 30660 by DVGW. Hot drinking water approved acc. BS6920 by WRc. Drinking water approved acc. KTW by TZW. Adjustable up to 45°.   Packaging Details: 80m dispenser 160m dispenser 180m dispenser

€ 14,90

TANGIT

TANGIT PVC-U ADHESIVE

PRODUCT ADVANTAGES Long open time of 4 minutes. Easy bonding, even of larger dimensions (one person sufficient for pipes up to 80 mm). Easy and clean handling. Higher security thanks to excellent gap-bridging capability (low flow value). Maximum leak protection. The bonded joints are as resistant as the respective pipe material (exception: concentrated acids). Meets the requirements of EN 14814 and EN 14680. Complies with EN 1329 for discharging water with plastic piping systems.   Packaging Details 125g Tube 250g Can (with and without brush) 500g Can (with and without brush) 1kg Can (with and without brush)

€ 7,90

NOFIRNO

NOFIRNO CARTRIDGE SEALANT MARINE APPROVED 310ML

NOFIRNO is a permanently elastic sealant with fire protection up to EI120, waterproof up to 2.5 bar, gas-tight up to 1.0 bar, in 310 ml cartridge, incl. spray nozzle. Also as level compensation and grouting to achieve cold smoke tightness with NOFIRNO

€ 59,90

3M

3M GENERAL PURPOSE MASKING TAPE 2020

General-purpose masking tape offers excellent adhesion and strength for masking, binding and bundling. Pliable material conforms to curved and contoured surfaces for consistent application. Writable, crepe paper backing makes it simple to personalize anything you can imagine. Easy-tear design removes quickly by hand for immediate application.

€ 17,90

3M

3M FINE LINE TAPE 218

Scotch® Fine Line Tape 218 is a high-performance polypropylene plastic tape that has both a low profile and high adhesion for use in painting long straight lines and sweeping curves where a crisp, sharp paint line is desired. It is often used as a layout tape for high value multi-color and custom painted graphics. Perfect Your Straight Lines and Sweeping Curves Scotch® Fine Line Tape 218 features a natural rubber pressure adhesive capable of delivering the high instant adhesion necessary for critical, large-scale paint applications. This tape has proven itself to be ideal for painting long, straight lines as well as smooth, sweeping curves. The polypropylene backing is stiffer than vinyl fine line tapes, while conforming easily around corners. Scotch® Fine Line Tape 218 features good moisture and solvent resistance. It resists heat in bake cycles that reach 250°F/121°C for up to 30 minutes.  

€ 6,60

3M

3M SAFETY WALK SLIP RESISTANT TAPE 370 - GREY

3M™ Safety-Walk™ Slip Resistant General Purpose Tape 370 Series is a mineral-coated, abrasive material adhered by a durable resin to a pressure-sensitive adhesive backed plastic film. It provides an effective slip resistant surface in light to heavy shoe-traffic areas. Primarily for use on dry, wet, oily floors in industrial and commercial applications with intensive pedestrian or light vehicle traffic such as: corridors, production and storage rooms, ramps, stairways, ladders, footplates on machines and emergency exits. Available in a variety of colours and sizes. 3M™ Safety-Walk™ Slip Resistant Tapes and Treads Series 370 has been certified by the National Floor Safety Institute (NFSI) as providing “high-traction.” A wet static coefficient of friction (SCOF) of greater than 0.60 was chosen by NFSI as the criteria for “high traction” because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip-and-fall claims by between 50% and 90%.

€ 79,90

3M

3M SAFETY WALK SLIP RESISTANT TAPE 620 - CLEAR

3M™ Safety-Walk™ Slip Resistant General Purpose Tape 620 Series is a mineral-coated, abrasive material adhered by a durable resin to a pressure-sensitive adhesive backed plastic film. It provides an effective slip resistant surface in light to heavy shoe-traffic areas. Primarily for use on dry, wet, oily floors in industrial and commercial applications with intensive pedestrian or light vehicle traffic such as: corridors, production and storage rooms, ramps, stairways, ladders, footplates on machines and emergency exits. Available in a variety of colours and sizes. 3M™ Safety-Walk™ Slip Resistant Tapes and Treads Series 620 has been certified by the National Floor Safety Institute (NFSI) as providing “high-traction.” A wet static coefficient of friction (SCOF) of greater than 0.60 was chosen by NFSI as the criteria for “high traction” because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip-and-fall claims by between 50% and 90%.

€ 49,90

3M

3M SAFETY WALK SLIP RESISTANT FINE TAPE 280 - WHITE

3M™ Safety-Walk™ Slip Resistant General Purpose Tape 280 Series is a mineral-coated, abrasive material adhered by a durable resin to a pressure-sensitive adhesive backed plastic film. It provides an effective slip resistant surface in light to heavy shoe-traffic areas. Primarily for use on dry, wet, oily floors in industrial and commercial applications with intensive pedestrian or light vehicle traffic such as: corridors, production and storage rooms, ramps, stairways, ladders, footplates on machines and emergency exits. Available in a variety of colours and sizes. 3M™ Safety-Walk™ Slip Resistant Tapes and Treads Series 280 has been certified by the National Floor Safety Institute (NFSI) as providing “high-traction.” A wet static coefficient of friction (SCOF) of greater than 0.60 was chosen by NFSI as the criteria for “high traction” because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip-and-fall claims by between 50% and 90%.

€ 75,00

3M

3M SAFETY WALK SLIP RESISTANT TAPE 610 - BLACK

3M™ Safety-Walk™ Slip Resistant General Purpose Tape 600 Series is a mineral-coated, abrasive material adhered by a durable resin to a pressure-sensitive adhesive backed plastic film. It provides an effective slip resistant surface in light to heavy shoe-traffic areas. Primarily for use on dry, wet, oily floors in industrial and commercial applications with intensive pedestrian or light vehicle traffic such as: corridors, production and storage rooms, ramps, stairways, ladders, footplates on machines and emergency exits. Available in a variety of colours and sizes. 3M™ Safety-Walk™ Slip Resistant Tapes and Treads Series 600 has been certified by the National Floor Safety Institute (NFSI) as providing “high-traction.” A wet static coefficient of friction (SCOF) of greater than 0.60 was chosen by NFSI as the criteria for “high traction” because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip-and-fall claims by between 50% and 90%.

€ 55,00

3M

3M FOAM FAST SPRAY ADHESIVE 74 - 500GR

3M™ Foam Fast Spray Adhesive 74 is a fast-drying adhesive that bonds foam and fabric to a wide range of substrates. While offering an aggressive tack with a high initial grab and foam-tearing strength, this adhesive allows sufficient open time to position materials properly thanks to its high-solids content and low soak-in properties. It also provides high coverage and helps create soft, non-dimpling glue lines. Additionally, 3M™ Foam Fast Spray Adhesive 74 dispenses easily in a lace-spray pattern and applies directly onto surfaces, making it a quick, 'go-to', everyday-use solution. Fast-Acting, Long Lasting 3M™ Foam Fast 74 Spray Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. For many, "getting the job done" is just a spray away.

€ 29,90

3M

3M MULTIPURPOSE SPRAY ADHESIVE 77 - 500GR

We invented 3M™ Super 77™ Multipurpose Spray Adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Its permanent bond provides fast results to keep projects moving ahead. Our photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time.

€ 27,90

3M

3M DUAL LOCK BLACK & CLEAR 25MM X 2.5MTR

Bond attachments to metals, glass and high surface energy plastics with 3M Dual Lock Reclosable Fastener SJ3560. Our fastener has great longevity with a closure life of 1000 times and is quick and easy to use. It has a clear acrylic adhesive on the back of clear polypropylene with 250 stems per square inch.

€ 59,90

3M

3M DUCT TAPE SILVER/BLACK 1900 50MM

3M™ Value Duct Tape 1900 is a good toolbox tape for general applications including light-duty sealing, bundling, marking, and temporary repairs in non-critical applications. Its synthetic rubber adhesive sticks on contact to smooth metal, glass, plastic, sealed concrete and more, and the water-resistant polyethylene coating seals well in moist and humid environments.

€ 8,90

3M

3M UV MASKING YELLOW TAPE 244

Scotch® Performance Masking Tape 244 is provided with a yellow smooth paper backing and a 0.085 mm thick synthetic adhesive. This tape is particularly resistant to UV, and is waterproof. It has a good temperature resistance (100 ° C). This tape can be used for a wide range of masking applications, especially for applications where UV resistance and clean removal is required and with an optimum temperature of 100°C for 30 minutes (i.e Marine market)

€ 9,50

3M

3M UV MASKING BLUE TAPE 2090

ScotchBlue™ Multi-Surface Premium Masking Tape has a premium ScotchBlue™ backing and high adhesive quality, for professional results indoors and outdoors. It has medium adhesion with easy removal and no residue up to 14 days after application. Get ScotchBlue™ Multi-Surface Premium Masking Tape for professional results on most indoor and outdoor surfaces. This highly versatile medium adhesion tape is ideal for intensive use on multiple surfaces, including walls, ceilings, metal, wood and glass. It has a premium backing to ensure conformability, while being easy to tear. Being UV resistant, it can be used in direct sunlight without any risk of sticky residues up to 14 days after application.

€ 8,50

WEST SYSTEM

WEST SYSTEM SIX10 EPOXY ADHESIVE - 190ML

Six10® Thickened Epoxy Adhesive combines the strength, reliability, and excellent physical properties of a two-part WEST SYSTEM® Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass, and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.

€ 35,00

WEST SYSTEM

WEST SYSTEM FAST HARDNER 205

205 Fast Hardener® is formulated for general coating and bonding applications at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. The 105 Epoxy Resin®/205 Fast Hardener system forms a high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. Not intended for clear coating.

€ 25,00

WEST SYSTEM

WEST SYSTEM SLOW HARDNER 206

206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin® in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.

€ 25,00

WEST SYSTEM

WEST SYSTEM EPOXY RESIN 105

105 Epoxy Resin® is a clear, low-viscosity liquid epoxy resin. Formulated for use with one of four WEST SYSTEM® hardeners. It can be cured in a wide temperature range to form a high-strength solid bond with excellent moisture resistance. 105 Epoxy Resin, when mixed at the proper ratio with a WEST SYSTEM hardener, is an excellent adhesive. 105 Epoxy Resin is designed to wet out and bond to: Wood bonding Fiberglass Reinforcing fabrics Composite materials Variety of metals

€ 35,00

LOCTITE

LOCTITE INDUSTRIAL 55

Thread Sealing Thread - Instant sealing against full pressure. Connections can be readjusted after tightening. LOCTITE® 55 is used for sealing metal and plastic pipe threads and fittings. The product requires no waiting time for curing and provides instant sealing against full pressure. The ideal choice for quick, easy and reliable sealing. The product is approved for gas and drinking water and certified according to NSF/ANSI Standard 61.

€ 28,00

LOCTITE

LOCTITE INDUSTRIAL 275

Green, high-strength, high-viscosity methacrylate-based threadlocker, suitable for large threads. Product monitoring by fluorescence. LOCTITE® 275 is a green, high strength, high viscosity, thixotropic, methacrylate based threadlocker. It achieves handling strength in 15 minutes on steel, 7 minutes on brass and 180 minutes on stainless steel, making it ideal for applications where adhesive migration must be avoided. Tolerates light oily contamination from industrial oils. Suitable for large threads. Product monitoring by fluorescence.

€ 105,00

LOCTITE

LOCTITE INDUSTRIAL 574

Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.

€ 44,00

LOCTITE

LOCTITE INDUSTRIAL 573

Gasketing Product - slow curing. Ideal for use on machined and rigid metal flanges. LOCTITE® 573 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmission and engine casings, etc. It is the ideal product for part assembly jobs extending over several hours. The nature of LOCTITE 573 reduces the migration of liquid product after application to the part.

€ 39,90

LOCTITE

LOCTITE INDUSTRIAL 510

LOCTITE 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges. LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

€ 55,00

LOCTITE

LOCTITE INDUSTRIAL 648 50ML

LOCTITE 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit. LOCTITE® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.

€ 75,00

LOCTITE

LOCTITE INDUSTRIAL 290 50 ML

LOCTITE 290 is a medium/high strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners. LOCTITE® 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.

€ 75,00

LOCTITE

LOCTITE INDUSTRIAL 270 50 ML

Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies. LOCTITE® 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

€ 75,00

LOCTITE

LOCTITE INDUSTRIAL 243 50 ML

LOCTITE 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration. LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.

€ 15,90

LOCTITE

LOCTITE INDUSTRIAL 222 50 ML

Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies. LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

€ 75,00

LOCTITE

LOCTITE INDUSTRIAL SI 5926 50ml

Gasketing Product - multi-purpose flexible silicone sealant. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. LOCTITE® SI 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings. This product is typically used in applications with an operating temperature range of -54 °C to 204 °C.

€ 19,90

LOCTITE

LOCTITE INDUSTRIAL 401 20g

LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates. LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

€ 32,00

LOCTITE

LOCTITE INDUSTRIAL 406 20g

LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required. LOCTITE® 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

€ 39,90

LOCTITE

LOCTITE INDUSTRIAL 480

LOCTITE® 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides rapid bonding for a wide range of materials, including metals, plastics and rubbers. LOCTITE 480 exhibits good resistance in humid environments.

€ 49,00

LOCTITE

LOCTITE INDUSTRIAL 496 20g

LOCTITE® 496 is a transparent, colorless, low viscosity, general purpose, methyl-based instant adhesive that is particularly suited to bonding metals. Other materials bonded include plastics and rubbers, as well as polyolefins (in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239). It offers a fixture time of 10 - 30 secs.

€ 35,00

LOCTITE

LOCTITE INDUSTRIAL 495 20g

LOCTITE® 495 is a transparent, colorless, low viscosity, general purpose ethyl-based instant adhesive offering fast bonding (5-20 secs fixture time). It is able to bond a wide range of materials, including plastics, rubbers and metals. It can also bond polyolefins when used in combination with Primer LOCTITE® SF 770 or LOCTITE® SF 7239.

€ 39,00

SIKA

SIKAFLEX MARINE 290DC PRO - 300ML

Sikaflex®-290 DC PRO is a 1-component polyurethane based joint sealing compound, specifically formulated for caulking joints in traditional timber marine decking. It exhibits excellent weathering resistance and is therefore well suited for highly exposed open joints within the maritime environment. The sealing compound cures to form a flexible elastomer which allows a fast and easy sanding process. Sikaflex®-290 DC PRO meets the requirements set out by the International Maritime Organisation (IMO).  

€ 18,90

SIKA

SIKAFLEX MARINE 295UV - 300ML

Exterior sealant and direct glazing adhesive for organic glass in Marine applications Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  

€ 19,90

SIKA

SIKAFLEX MARINE 291i - 300ML

Sikaflex®-291 is a non-dripping, polyurethane basedadhesive sealant for boat building. It is moisture curing creating a long lasting elastomer.ISO 9001/14001 - 1-component formulation - Elastic - Low odour - Resistant to ageing& weathering, and non-corrosive - Can be over-painted and can be sanded - Bonds well to a wide variety of substrates - Electrically non-conductive Use temperature (constant): -40°C...+90°C Short term (max. 8 hrs) 120°C

€ 16,90

TEAKDECKING SYSTEM

TEAK DECKING SYSTEM CAULK

SIS 440 Teak Deck Caulking One-part polymer adhesive/sealant neutral cure No primer necessary* Over 35 years of proven success SIS 440 Caulking provides the durability boat owners require. It is a one-part, paste-like neutral cure formulation and when exposed to moisture in the air, it reacts to form a tough, flexible, solid rubber. The material does not sag during cure. Once cured, it has excellent temperature stability and chemical resistance. This neutral cure is non-corrosive to all substrates. SIS 440 Caulking was developed mainly for teak decking seams. This silane polymer cures to provide better adhesion, longevity and appearance as compared to polysulfides, polyurethanes and MS polymers. SIS 440 has the highest rating resistance to UV, excellent resistance to chemicals and excellent temperature stability. *SIS 440 Caulking is a well-tested and proven product in hot or cold climates, and no primer is needed when Application Instructions on packaging are followed as written.

€ 39,90

KENT MARINE

KENT ROTABOND 2000 - 290ML

Rotabond 2000 A high performance, one component, MS-Polymer adhesive and sealant. Features & Benefits No solvents - can be over painted after skin forming No isocyanates - completely safe to use & can be spot welded through Heavy bodied sealer - no slump or sag Totally flexible - will not shrink, crack or harden Does not string - neat application, quality finish Wet / dry application - saves time Application Rotabond 2000 is for use as an all-purpose sealer and highly flexible adhesive. Adheres to primed, painted and bare metal, zinc coating, aluminum, copper, brass, powder coated metal, glass, wood, natural stone and most plastics. For sealing welded seams, fixing metals and synthetics, fixing and sealing window frames, floors, panels, roofing, sanitary fittings, piping, seal and cover rivet / fastener heads.

€ 29,90